Our software will change DATA MOD before and after the transmission when the software is configured correctly. changing the rig's setting for "DATA MOD" from USB to ACC If that doesn't solve the problem, add one on the other end, again multiple turns.changes the rig's current Filter from Filter 1 to Filter 2Ī byproduct of not setting the Mode Control properly. Wrap the USB cable several turns in a ferrite at one end of the cable. RTTY and RTTY-R obviously set the mode to RTTY (and change the filter) Got any other suggestions? Thanks, Steve On 7:07 AM, John Bednar wrote: Steve, There are many IC-7300 users that have zero issues and two of the development team members own a IC-7300.kept losing my USB connection from PC to rig. I was originally set to "No Change" AFSK changes radio to LSB-D and sets Filter 2 AFSK-R, radio remains in USB-D but sets Filter 2 USB doesn't work as it sets mode to USB, not USB-D. I tried different settings on the mode control for PSK as Rich suggested. I exited the program before unplugging the USB cable. (?) As for the RF, I have two mix 31 snap on ferrite beads with 4 turns each on all my cables. ![]() On Sun, at 11:53 am, Steve Wilkes wrote: I also run DM780 and WSJT-X and have not had these types of problems. This email has been checked for viruses by AVG. (This may have happened at times other than changing bands) This was damn annoying as I'd have to reset the DATA MOD setting, then a lot of times had cycle the power on the rig and unplug/plugin the usb cable from the laptop to get everything sync'd. (b) it it changing the rig's setting for "DATA MOD" from USB to ACC. (a) it changes the rig's current Filter from Filter 1 to Filter 2. What I noticed was that when changing bands using the N1MM entry screen there are two problems. ![]() Tried to work the 070 Club contest this weekend but kept loosing my USB connection from PC to rig. To: N1MM / FLDIGI with Icom IC-7300 - loosing USB connection Solve your RF egress issue.įrom: On Behalf Of Steve Wilkes via Groups.Io Unplugging the USB cable when the program is running will only add to your problems. changing the rig's setting for "DATA MOD" from USB to ACCYou do NOT need to set DATA MOD. changes the rig's current Filter from Filter 1 to Filter 2A byproduct of not setting the Mode Control properly. If that doesn't solve the problem, add one on the other end, again multiple turns. ![]() kept losing my USB connection from PC to rig.RF egress. There are many IC-7300 users that have zero issues and two of the development team members own a IC-7300.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |